Push-Pull Detachable SC/APC FTTH Drop Patch Cord – 3×2mm Flat Cable, G657A2, LSZH
Product Overview
Simplify FTTH Cable Entry Through Small Wall Openings
Routing a pre-terminated fiber cable through a wall can require an opening large enough to accommodate a fully assembled connector. Rayoptic’s Push-Pull Detachable SC/APC FTTH Drop Patch Cord addresses this installation challenge with a compact, factory-terminated end and a separately supplied green connector housing.
At the detachable end, fiber termination is completed at the factory, while the green SC/APC housing remains uninstalled for delivery. The protected ferrule assembly can be pulled or pushed through a hole as small as 4.5 mm in diameter. Once the cable has passed through the wall, the installer fits the green housing around the assembly and snaps the cover into place without tools.
This push-through or pull-through installation method helps reduce the size of the required wall opening and simplifies on-site work. No fiber splicing or connector termination is required at the installation site.
The assembly features a detachable SC/APC connector at one end and a fully assembled standard SC/APC connector at the other. Insertion loss is below 0.3 dB per connector, and return loss is above 60 dB.
Connector tensile strength is 60 N, and the operating temperature range is −40°C to +70°C, supporting demanding last-mile installation environments.
Available lengths include 10, 20, 30, 40, 50 and 60 m. Custom lengths can be supplied to match specific cable routes and installation requirements.
Fetures
• Push-through or pull-through routing
The protected connector end can be pushed or pulled through wall openings during installation.
• Passes through 4.5 mm holes
The compact ferrule assembly fits through holes as small as 4.5 mm before the green SC/APC housing is installed.
• Factory-terminated, housing supplied separately
Optical termination is completed at the factory. The detachable end is delivered with its green housing uninstalled and ready for on-site assembly.
• Tool-free housing assembly
Fit the housing around the terminated assembly and snap the cover into place after routing.
• No on-site splicing or termination
Simplifies installation and helps reduce labor time and costs.
Technical Specification
| Parameter-pull deta | Specification |
| Product Type | Pushchable FTTH drop patch cord |
| Connector A | Factory-terminated detachable SC/APC; green housing supplied separately |
| Connector B | Fully assembled standard SC/APC |
| Connector Polish | APC at both ends |
| Fiber Type | G.657.A2 bend-insensitive single-mode fiber |
| Cable Structure | Flat drop cable |
| Cable Dimensions | 3 × 2 mm |
| Outer Sheath Material | LSZH |
| Sheath Color | White |
| UV Resistance | UV-resistant outer sheath |
| Available Lengths | 10, 20, 30, 40, 50 and 60 m; custom lengths available |
| Insertion Loss | < 0.3 dB per connector |
| Return Loss | > 60 dB |
| Connector Tensile Strength | 60 N |
| Operating Temperature | −40°C to +70°C |
| Hole Passage | Protected ferrule assembly passes through a 4.5 mm diameter hole before housing installation |
| Routing Method | Push-through or pull-through at the detachable end |
| On-Site Assembly | Tool-free installation of the green SC/APC housing |
| On-Site Splicing or Termination | Not required |
| Installation Environment | Indoor and outdoor |
| Main Applications | FTTH subscriber drops, last-mile access and customer premises connections |
Installation Overview
Push or Pull Through, Then Assemble
The detachable end is supplied with the green SC/APC housing uninstalled. Complete cable routing before assembling the housing.
Route the protected end
Push or pull the protected ferrule assembly through the wall opening. The compact end supports passage through holes as small as 4.5 mm.Align the ferrule assembly
After routing, position the lower housing half with its open side facing upward. Locate the red alignment mark on the ferrule holder and keep it facing upward.Seat the assembly
Place the ferrule assembly into the housing. Gently pull the cable backward while pressing the spring into position until the assembly is correctly seated.Close the housing
Fit the upper housing cover and press it into place until it clicks securely.
Keep the ferrule protected during handling and housing assembly. Inspect and clean the connector end face before mating.
Application
• FTTH subscriber drop connections
• Last-mile fiber access networks
• Fiber cable entry through small wall openings
• Outdoor-to-indoor fiber transitions
• Residential and commercial premises installations
• Connections between fiber termination boxes, optical outlets and equipment with compatible SC/APC interfaces
English
Spanish