LC UPC to LC UPC Uniboot Duplex OM3 Multimode PVC(OFNR) 3.0mm Fiber Optic Jumper
Tags: LC UPC Duplex Uniboot Connector, OM3 multimode fiber optic cable,OM4 multimode fiber optic cable
Features
- Meets IEC random mating Grade B
- 50% Space-saving Uniboot for High Density Applications
- Optimized for 400G data rates with QSFP-DD, OSFP and SFP-DD transceivers
- Combines two 1.25 mm ceramic ferrules
- Easily permit to switch the polarity of the fibers only by maneuvering the connectors without the need of a special tool.
Optical Parameters
Connector Type | LC UPC to LC UPC | Fiber Grade | Bend Insensitive |
Fiber Mode | OM3,OM4 50/125μm | Wavelength | 850/1300nm |
40G Ethernet Distance
| 150m at 850nm | 100G Ethernet Distance | 100m at 850nm |
Insertion Loss
| ≤0.2dB | Return Loss | ≥30dB |
Attenuation at 850nm | 3.0dB/km | Attenuation at 1300nm | 1.0dB/km |
Fiber Count | Duplex | Cable Diameter | 2.4mm/3.0mm |
Cable Jacket | PVC,OFNR,OFNP | Polarity | A (Tx) to B (Rx) |
Mechanical Parameters
Item | Value |
Durability | 500 matings per TIA-568 |
Fiber Count | Duplex (2 fibers) |
Cable Suitability | 2.0mm/3.0mm jacketed |
Ferrule Material | Zirconia |
Dust Protection Method | Removable dust plugs that encapsulate the ferrules |
Environmental Parameters
Item | Value |
Operating Temperature | -40℃ to 75 ℃ |
RoHS Compliance | 2015/863 RoHS |
RACH Compliance | Yes |
Free of Halogen | Yes |
Humidity Resistance | 95% |
Application
- High-density patching
- QSFP-DD, OSFP and SFP-DD transceiver links for higher data rates
- FTTH, Wireless, Data Center
- Hyperscale, edge, enterprise and colocation data centers
This LC UPC to LC UPC Uniboot Duplex OM3 Multimode Fiber Optic Jumper is designed for high-density networking environments where clean cable management and fast serviceability matter. Built with a 3.0mm round duplex cable and PVC(OFNR) riser-rated jacket, it delivers reliable multimode performance while keeping your racks neat and organized.
Uniboot design for cleaner patching
Unlike traditional duplex patch cords with two separate boots, the uniboot structure combines both fibers into a single, compact cable entry. This helps reduce clutter in crowded patch panels and switches, improves airflow, and makes routing easier—especially in data centers, telecom rooms, and enterprise networks.
Polarity-reversible LC uniboot connector (key benefit)
A major advantage of this jumper is its polarity-reversible uniboot LC connector, which allows you to swap A/B polarity without re-terminating or replacing the cable. This feature is extremely helpful when:
correcting Tx/Rx alignment during installation,
adapting to different equipment port mapping,
speeding up troubleshooting and changes in the field.
-
- Front view
-
- Rear view
-
- Side view
-
OM3 multimode for backbone and equipment interconnects
With OM3 multimode fiber, this jumper supports common short-reach optical links used in switch-to-switch, server interconnect, and patching applications. It’s a practical and widely adopted choice for modern network upgrades where performance and cost need to stay balanced.
English
Spanish