Communication networks from the optical fiber communication technology platform provide various fiber optics services. Fiber optic plays an important role in routine networking and communication with people. A fiber optic patchcord is a simple fiber cable with connectors on both ends.

Various kinds of fiber optic cables are available for networking worldwide. Fiber optics are fine cables because they are specifically designed to deliver signals from one place to the other with no distortion.

Types of fiber optic patch cord you need to know about

Different types are available nowadays for frequent and efficient telecommunication services that are categorized based on the following;

1. Core diameter

Depending upon the core diameter fiber optics, it is further classified into single or multimode fiber optic cable.

Single-mode fiber optic patch cord is uni-directional because it only transfers signals in one direction. Hence, these fiber optics are used for transferring massive data with better efficiency and lower attenuation.

However multimode fiber optic patch cord is bi-directional with two connectors at both ends; hence could use for transferring data from both devices at a time.

2. Connectors on cables

Fiber optic patch cord is also classified based on the number and types of connectors present on the terminating ends of optic cords. However, based on the number of connectors on the optic cord, there are two types;

• A cord with only one cable and a connector at its terminating ends is named a simplex fiber optic cord.
• While a fiber optic patch cord with two fiber cords with two connectors at both terminating ends is named a duplex fiber optic cord, a duplex fiber cord is used in a higher level of networking, such as in server systems.

However, depending on the types of connectors, various fiber optic patch cords are designed for different purposes.

A fiber optic cord with a straight tip (ST) connector on its terminating ends is feasible for both single and multimode fiber cords. ST connectors are designed by installing springs in them to make them able to transformation of signals over long distances.

The type of connector specifically designed to act as a converter with a simple installation technique is named subscriber connector (SC).

3. Cord polish

Depending upon the type of polish on the fiber cord, the fiber optic patch cord is divided into three different cords that are

• Physical contact fiber optic patch cord
• Ultra physical fiber optic patch cord
• Angel physical fiber optic patch cord

Selection of the best cord type for your network

From the variety of fiber optic patch cords mentioned earlier, everyone selects the best one depending upon his need for their network.

Hence low insertion loss, bend insensitive, uniboot, and duplex fiber patch cords should be selected depending on the user’s demand.

Fiber optic patchcord is network-spreading parts of fiber optics communication technology for the fine networking of people. You can get all the related products from our website.