A fiber optic patch cord is an optical components cable with connector plugs inserted at each of its ends to achieve the active connectivity of the optical path.

The end without a plug is referred to as a pigtail. There is no mesh shield on fiber optic patch cords, unlike coaxial wires.

The glass key part that allows light transmission is located in the center.

The main diameter of multimode fiber is 50–65 mm. about the same width as human hair. The single-mode fiber core has an 8-m-by-10-m diameter.

The fiber optic is kept inside the core by a glass envelope that has a refractive index that is lesser than the core. A thin plastic jacket serves as the envelope’s outer covering.

Source for a high-quality fiber optic patch can sometimes be a hectic task considering the number of products that had flooded the market.

Hence the need to partner with a trusted and reliable fiber optic patch cord manufacturer.

Classification of fiber optic patch cords

There are several distinct kinds of fiber patch cords, including standard silicon-based single-mode and multi-mode optical fiber patch cords alongside other fiber optic patch cords using plastic as the medium of transmission.

It can be separated into FC patch cords, SC patch cords, St patch cords, and so on based on the connection structure.

There are several different types of common fiber optic patch cords, including FC-FC, FC-SC, FC-LC, FC-ST, SC-SC, and SC-ST.

Single-mode optical fiber is usually denoted by a yellow fiber optic patch cord with a blue connector and safeguarding sleeve. The broadcast range has increased.

Multimode optical fiber is typically depicted as an orange fiber optic patch cord. Green and magenta are used to indicate some, and beige or black are used for the connector and safeguarding sleeve. There is a close transmission gap.

 Instruction for use of fiber optic patch cord

The following instruction should be strictly followed to ensure the durability of the device

1. The fiber optic patch cord’s ceramic core and end face need to be thoroughly cleaned before use. To do this, use soft cotton and rubbing alcohol.
2. The optical fiber has a least bending radius of less than 30mm.
3. Avoid bumping and hazardous waste by protecting the end face of the insert core. Put the dust cap on as soon as the assembly is complete.
4. When sending the laser signal via the optical cable, avoid looking straight at the end face.
5. The damaged fiber optic patch cord must be promptly replaced in cases of damage brought on by people or other unavoidable circumstances.
6. If there are unusual circumstances within the optical fiber network or system, a diagnostic approach can be used to test each component individually.
7. Before setting up, thoroughly read the manual for installation. The commissioning and setup process should be performed under the supervision of the manufacturer’s or salesman’s engineer.

In Need of a high-quality Fiber Optic Patch Cord

The fiber optic patch cord is a unique product with a ton of advantages that make them appealing in the market today. It is important to know their varieties and instructions for their appropriate use.

If you want to purchase a fiber optic patch cord that is of excellent quality and durability, you need to partner with a reputable and trusted fiber optic patch cord manufacturer

Rayoptic Communication Co., Ltd. ensures that you will get your preferred quality fiber optic patch cord and will make every effort to provide the best thanks to our state-of-the-art facilities and staff of technologically advanced specialists. To view our numerous product collections, click here.